Results 1 to 9 of 9

Thread: my moded apache

  1. #1
    Join Date
    Apr 2007
    Location
    NJ
    Posts
    1,321

    Default my moded apache

    Well here she is ...Flex cable routed through stock rudder that's fixed in place and then added a pro boat turn rudder put a extra section of plastic behind the back of the hull wall to make the rear stronger... One thing now i am wondering if i should cut off the fin as show in the photo?...Or will this fin make it more stable in the turns?
    Attached Images Attached Images
    :p What go faster that's what I like to do!
    Custom RC radio steering grips
    WWW.PPRSLOTS.COM

  2. #2
    Join Date
    Mar 2009
    Location
    nj
    Posts
    162

    Default

    Sweet bro. I've done the power up grade thing so far I'm still running stock hardware and u can tell things are off center. Are u still running a brushed motor in her?

  3. #3
    Join Date
    Apr 2007
    Location
    NJ
    Posts
    1,321

    Default

    Hi yes i am but after i did the flex shaft mod the boat is smooth as glass no vibrations at all ...the stock unit made it sound like the boat was going to vibrate apart!!
    :p What go faster that's what I like to do!
    Custom RC radio steering grips
    WWW.PPRSLOTS.COM

  4. #4
    Join Date
    Aug 2010
    Location
    wi
    Posts
    1,460

    Default

    How has thisa worked?

  5. #5
    Join Date
    Apr 2007
    Location
    NJ
    Posts
    1,321

    Default

    Hi it works great i cut the bottom fin off now also.
    http://www.youtube.com/watch?v=sibSxqJVlUc
    :p What go faster that's what I like to do!
    Custom RC radio steering grips
    WWW.PPRSLOTS.COM

  6. #6
    Join Date
    Aug 2010
    Location
    wi
    Posts
    1,460

    Default

    could you post a current pic

  7. #7
    Join Date
    Oct 2011
    Location
    CA
    Posts
    3

    Default

    I would have gone for an entirely new strut but hey, if it works well and she tracks strait then sweet...

  8. #8
    Join Date
    Oct 2012
    Location
    Fl
    Posts
    24

    Default

    Should have used a BJ26 flexshaft with U joint PRB2812.

  9. #9
    Join Date
    Apr 2007
    Location
    NJ
    Posts
    1,321

    Default

    Quote Originally Posted by Bomber Z View Post
    Should have used a BJ26 flexshaft with U joint PRB2812.
    No need mine works perfectly fine.
    :p What go faster that's what I like to do!
    Custom RC radio steering grips
    WWW.PPRSLOTS.COM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •