Powering up a 70" mono

[Gerwin Brommer]

How do they say it in the States ?

" there is no substitute for cubic inches " ???

[Punisher 67]

THERE IS NO REPLACEMENT FOR DISPLACEMENT

Some american women follow that moto also................

[Joern Markset]

THERE IS NO REPLACEMENT FOR DISPLACEMENT

Some american women follow that moto also................

Not only american women...

[ozzie-crawl]

bustitup is this what you was thinking of

[Ub Hauled]

bustitup is this what you was thinking of

Which one are you using in your boat?

[ozzie-crawl]

well i can afford 2 coke cans

[Ub Hauled]

I can only afford a Diet Coke, heheheheh...

[Joern Markset]

Here is a closer look of the cnc machined radioboxes. I`m just about to finish the 11th boat this winter, and this box goes inside!

[EPower]

Here is a closer look of the cnc machined radioboxes. I`m just about to finish the 11th boat this winter, and this box goes inside!

LOL so many bolts to hold a lid what's the point

[Joern Markset]

Pulling up an old thread. The Nodd V180 project was put on ice for several reasons.
However, it is time to do something with it. I bought a decent TP motor for the hull, and had my team mate make a motormount for it.
So the Nodd V180 will now get a nice TP 100 motor between his rails ;-)
bilde 1.jpgbilde 3.jpgbilde.jpgbilde 5.jpg

[Punisher 67]

Joern good to see you my friend.

I have the same motor and will one day do something with it also. Funny we both bought one for probably the same reasons.... . LOL.

[blowNover]

Ok I've got to see more of this!

[Joern Markset]

I will put one of my MGM`s in it.
1234501_10151605947916426_1199836457_n.jpg1238863_10151605947566426_1911303422_n.jpg
And start with a 12S2P / 11600 mah configuration, maybe expand very quick to 12S3P / 17400 mah config.

[Punisher 67]

Hello Joern

any more on your project . I have started the mount design for my motor .

[Joern Markset]

I have not had enough time to put full focus on this boat so far, so progress is kind of slow.
Your mount looks good, as always :-)

[twissted]

run duel motors. If just single motor I would also look At the TP-Power 5660 line tppowerusa.com has them at 150.00 with free water jacket. I have seen these motors move big boats! You will need a monster speed control. 300 amps or better.

[twissted]

pulling up an old thread. The nodd v180 project was put on ice for several reasons.
However, it is time to do something with it. I bought a decent tp motor for the hull, and had my team mate make a motormount for it.
So the nodd v180 will now get a nice tp 100 motor between his rails ;-)
bilde 1.jpgbilde 3.jpgbilde.jpgbilde 5.jpg

holy crap!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[twissted]

pulling up an old thread. The nodd v180 project was put on ice for several reasons.
However, it is time to do something with it. I bought a decent tp motor for the hull, and had my team mate make a motormount for it.
So the nodd v180 will now get a nice tp 100 motor between his rails ;-)
bilde 1.jpgbilde 3.jpgbilde.jpgbilde 5.jpg

HOLY CRAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
That is better than 30 hp!!!!!!!

[twissted]

https://www.youtube.com/watch?v=_U76...yCMhid7n1cs2NA

[Joern Markset]

I already have a cat on the bench who will have 2 x TP5850, and 2 x MGM X25063. :-)
And also a cat that most likely will have another TP100, just need to buy some extra time as well. *LOL*
I don`t use Flier esc cause they are too cheap.

[twissted]

Sounds like me! Too cheap! It would seem that you have some very fast boats!

[twissted]

Sounds like me! Too cheap! It would seem that you have some very fast boats!

[Fella1340]

I have been waiting for some crazy bugger to put that beast of a motor in something! You do the hobby proud. Peter showed us this motor awhile back and I have been waiting for him to unleash it on something. I can't wait to see this go, the amount of lipos must be staggering and close to the cost of the rest of the build combined. I thought the motor was just a showcase piece so TP could say "look how big mine is". Crazy! I love it.