Results 1 to 5 of 5

Thread: Etti 150 and neu 1521 1.5y????

  1. #1
    Join Date
    Mar 2008
    Location
    NC
    Posts
    535

    Default Etti 150 and neu 1521 1.5y????

    Will these controllers handle a neu 1521 1.5 y in a blackjack 26? And if so what props do you recommend and what cell count?

  2. #2
    Join Date
    May 2007
    Location
    NY
    Posts
    1,556

    Default

    Man I think that is a BIG motor for that hull.
    Team Liquid Dash

  3. #3
    Join Date
    Mar 2008
    Location
    NC
    Posts
    535

    Default

    yeah i know, but what do you think about the esc? And battery choice?

  4. #4
    Join Date
    Aug 2007
    Location
    AT
    Posts
    1,072

    Default

    The 1521/1.5y is 1050kv. You will need around 6-7s ( which version of the etti you have? Only the 2-7s can handle it) and a prop. 50mm diameter to have good speed. This setup is not very ideal but might work (about 80-90 amps?).
    I haven't tried it though. Small boat-huge motor with low KV-heavy batteries-big prop. It is like putting a 4000cc engine in a Smart car with 18" wheels. It won't last for very long.
    Most probably, you will end up changing shaft to bigger one and to reinforce the hull also.
    Last edited by DISAR; 03-30-2009 at 04:44 AM.
    Twin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
    http://www.rcfastboats.com/

  5. #5
    Join Date
    Mar 2009
    Location
    AK
    Posts
    391

    Default

    Quote Originally Posted by Raydee View Post
    Man I think that is a BIG motor for that hull.
    LOL it is allot of motor for a small boat and yes the Etti 150 race can handle it and add the Capacitor module
    Adrian

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •