would this be to much voltage for this 4068 2650 motor.
Thanks
would this be to much voltage for this 4068 2650 motor.
Thanks
Yes, I see that as an awkward middle ground that's a high Kv motor for 4s, or a low Kv motor for 3s.
For almost all uses its way too high Kv for 6s. You might get away with it for SAWs, but all SAWs setups are a potential fire waiting to happen.
Paul Upton-Taylor, Greased Weasel Racing.
It will get very hot very quickly. Plus the ESC might cut power based on the amperage being asked of it.
From my limited experience something around 1600-1800 kv seems to be good for 6s use.
That's 67,840 rpm on 6s. Nope !!
PT-45 109 mph and climbing
H&M 1/8 Miss Bud 73 mph
Chris Craft 16 mph
Thanks
Bookmarks