In the past, I've made a "Y" with several inches of 8ga wire. But I'd like to make a block, for neatness and shorter length. Would appreciate seeing some examples.
In the past, I've made a "Y" with several inches of 8ga wire. But I'd like to make a block, for neatness and shorter length. Would appreciate seeing some examples.
I?ve made a few by pinning together the three bullets with copper rod and soldering it all together. I insulated it with a moldable silicone putty that hardens but I forget the name. It came in different colors in small packs like ketchup.
Sent from my iPhone using Tapatalk
Namba District 16
1/8 Miss U.S., 1/8 59 Maverick, 1/8 Executone, 1/8 Smokin Joe, 1/8 Bud, MLGSX380, AC Pro40II Q Sport, AC Pro40II nitro,Twincraft mono 10s, Vision AOPC, VS1 FE, M34.
I cut copper bar on the lathe. holes are for wire leads and cap pack.
Nortavlag Bulc
I use a couple different styles.709249282.jpgIMG_8587.jpg
Is the silicone putty Sugru?
Paul Upton-Taylor, Greased Weasel Racing.
Food for thought
abbatt3.jpg
abbatt1.jpg
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
Thanks, guys. Now I am leaning toward a "T" configuration. Wonder if "liquid electrical tape" would hold up to the heat.
Ron, the harness was basically made with 12 guage wire and lots of soldering. Drop in the batteries for 4S 2P and go. Simple clean plug n' play -El Neato.
Glad you're still digging the cracker; my Jersey Skiff sits lonely and dusty.
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono
Bookmarks