Page 6 of 6 FirstFirst ... 456
Results 151 to 155 of 155

Thread: Mhz mystic 114 build

  1. #151
    Join Date
    Feb 2023
    Location
    ON
    Posts
    127

    Default

    CONTINUED...

    139.JPG 140.JPG

    After the dunk-test fully equiped, it will be revealed if more floatation is needed. There's plenty of realestate between the cowl and the bridgedeck. One of the reasons why I did not mount the ESC's etc. there. I can put a huge chunk of foam there.

  2. #152
    Join Date
    Jul 2016
    Location
    IL
    Posts
    4,124

    Default

    Hard to tell without the canopy opening in place for reference, but I hope you've left yourself enough room for the batteries to be slid forward.
    Vac-U-Tug Jr (13mph)

  3. #153
    Join Date
    Feb 2023
    Location
    ON
    Posts
    127

    Default

    Lots of room. With 6500mAh packs (the biggest I think I'll be using), cg tested good with them as far back as I could get them, without touching the ESC's. With smaller packs like 5000mAh, lots of room for sliding to front.

    BTW folks, I found a perfect spot for running these wee boats. Having done that, I'm going nuts not to be able to go play with them. Might have to get a ready to run ProBoat or something, to take care of the wait.

  4. #154
    Join Date
    Feb 2023
    Location
    ON
    Posts
    127

    Default

    Water pick-up tubes ready:

    143.JPG 144.JPG 145.JPG

  5. #155
    Join Date
    Jul 2016
    Location
    IL
    Posts
    4,124

    Default

    Where did you source the small diameter carbon braid? I've been looking for something like that to do exactly that same waterline wrap.
    Vac-U-Tug Jr (13mph)

Page 6 of 6 FirstFirst ... 456

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •