DF 28 pathfinder / mean machine

[vvviivvv]

Anybody have anything they?d part with?

I?m stateside until march and racing resumes mid April so I don?t have much time to build when I get back.

Looking for a single setup

Bare hull / with a 4s motor (2000-2400kv range)

[Rlimits]

Anybody have anything they?d part with?

I?m stateside until march and racing resumes mid April so I don?t have much time to build when I get back.

Looking for a single setup

Bare hull / with a 4s motor (2000-2400kv range)

https://www.facebook.com/marketplace...f-66e55657698c

[vvviivvv]

Unfortunately local pickup only.

[meangenesracing]

Laim, you looking for just the hull with motor? I have a pathfinder all setup with a TP 2100 kv, mgm esc. Or I have a bare hull I have been revamping Mean machine or it could be a knock off I bought it as a mean machine but I'm not to sure it is. The pathfinder has no damage just peeling paint and the hatch paint is striped off

[vvviivvv]

both may work, can you let me know what you want $ wise for the pathfinder and some pics / specs of the TP & MGM?

Could you also check if i could fit 2x 164x46x34mm lipo in the sponsons? This is what ill need for racing

Edit - 1 per sponson

[meangenesracing]

both may work, can you let me know what you want $ wise for the pathfinder and some pics / specs of the TP & MGM?

Could you also check if i could fit 2x 164x46x34mm lipo in the sponsons? This is what ill need for racing

Edit - 1 per sponson

Yes that's what I used for lipos 2. 4s. batteries. With the mgm controller no receiver everything in pitchers probably $500 plus $25 shipping
Or I could include a different ESC for less. I also could switch to a castle motor 1515 not sure of kv right off hand my friend has it at the moment and a seaking esc

[meangenesracing]

Other hull, maybe could scrounge up some hardware and set this up (in a short time)for you.

[BlakeT]

That does look to be a mean machine, also that drag cat is sweet!

[meangenesracing]

That does look to be a mean machine, also that drag cat is sweet!

Yea it is, got a quickdraw but just dinged it up yesterday high winds flipped it and went skidding into the dock. Just a slight Crack and broken rudder. No worries easy fix as I had carbon fiber reinforcement

[vvviivvv]

Yes that's what I used for lipos 2. 4s. batteries. With the mgm controller no receiver everything in pitchers probably $500 plus $25 shipping
Or I could include a different ESC for less. I also could switch to a castle motor 1515 not sure of kv right off hand my friend has it at the moment and a seaking esc

If you’d part with the hull without esc, (have a brand new one the same as that at home)
And also I’ll have to drop to a smaller motor, our race is 6 mins long and at 4s I have 8100mah to complete the 6 mins in…

[meangenesracing]

Laim, hull,hardware and servo. How's $200 plus shipping sound

[vvviivvv]

We have a deal on that, will send you a PM for a alternate proposition.