Hello gents,
Does anyone have one they'd sell? interested in pre built, or unbuilt hull, looking for the 880mm version.
Kind regards, Liam
Hello gents,
Does anyone have one they'd sell? interested in pre built, or unbuilt hull, looking for the 880mm version.
Kind regards, Liam
Last edited by vvviivvv; 11-18-2023 at 02:02 PM.
Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holder
Would also consider the a drifter hull or any similar sized cat hull that would fit oval racing bill on 4-6s.
Looking for something light weight.,
Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holder
I believe the Supercat is a bit wider than the Drifter and better round the oval.
Paul Upton-Taylor, Greased Weasel Racing.
Hi Paul.
Im gearing up to race next year at Bridlington and since it's a bit of a drive would like to run 3 possibly 4 classes,
I was thinking along the lines of a 4s, 10,000mah setup with the limiter - i guess i'd need an amp draw around 70 to get the run time in?
https://www.hydromarine.de/Hulls/Cat...mid::1119.html
I have a spare 1950 LMT with 2500kv which may be a bit amp heavy and require propping down, I can buy another motor but would be nice to use what I have to save some costs, also have plenty of capable ESC in that size range and some good quality 4s 5000mah lipo's...
For anyone else not familiar with our race setup, this will be a oval race that runs over the course of 6 minutes, to make things a little more even, energy limiters are used
on a 4s setup i would have 8100mah usable capacity via the limiter to complete the 6 minutes and get as many laps as possible...
Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holder
Bookmarks