Anyone change the caps on a spectrum 120

[Froggy]

Looks like the caps are blown on mine purchased it used, the caps are bulged on the ends thought I might try replacing however they are not available by any numbers on them
IMG_6638.jpgIMG_6639.jpg

[fweasel]

Those are ZLH series caps made by Rubycon, which are easy to find. You need a minimum voltage spec of 35V. Existing bank is 1170uf total, so I would probably use 500uf as a minimum on the replacements since this is a low current capacity ESC.

[Froggy]

Thanks for the reply, I jumped a bit too fast on this subject, I found them on e bay ��

[jkflow]

Get more of them else you will blow them again.
You had too much ripple which overheated the caps. Put 5 or 6 in parallel.

[Froggy]

I purchased 10 of them, thanks