OSE CNC High Rake Series Props

[larryrose11]

Team,
Does anyone know the rake of these props?

Has anyone tried them?
If you have, can you compare to an ABC prop?

Larry

[Bande1]

They look to be about 17 degrees. they are actually pretty nice in person. They are ABC clones but have light CNC marks all around with a professional, or machine sharpened edge. They can cavitate from a start with some hulls especially if there is a bow heavy center of gravity. which is true for any de-tongued 1.6 pitch prop.

very much worth the $40 price tag not to have to sharpen or balance. They ought to be more popular and more pitch choices made.

[Xrayted]

Team,
Does anyone know the rake of these props?

Has anyone tried them?
If you have, can you compare to an ABC prop?

Larry

They are all 1.6 pitch. You just decide which diameter you want between 40-50mm, so a 43mm diameter one would essentially be like the popular 1716 ABC prop. I have a couple of them, and so far they hold up better than the ready to run CNC ally props they sell. I keep losing blades easily on them

[fweasel]

They are all 1.6 pitch. You just decide which diameter you want between 40-50mm, so a 43mm diameter one would essentially be like the popular 1716 ABC prop. I have a couple of them, and so far they hold up better than the ready to run CNC ally props they sell. I keep losing blades easily on them

Just to be clear, you're loosing blades on the regular silver CNC props, and not the newer high rake versions?