2x Neu 1521 1Y 1577 KV.

[vvviivvv]

Bought for a project but never got around to using them

Ran them in a scale hull on 3s driving a 28mm plastic jet 3x otherwise brand new.

Bought from OSE.

$425 + shipping. (new price from OSE currently $640... down from $724.



Wc jackets are included

$425 + shipping.

[Jesse J]

What was purchase date?

[longballlumber]

I am interested in knowing about the mounting studs?

Is that some you put in?
Can they be removed (loctite)?

[vvviivvv]

Hi Jesse,

They are probably from around 2014 but i don't have a invoice or receipt to confirm.

and yes longball, just a stud with some loctite i used, if you heat up the stud a little and double nut on the shaft they will come straight out, it was the best mounting option for my build.

[longballlumber]

just a stud with some loctite i used, if you heat up the stud a little and double nut on the shaft they will come straight out, it was the best mounting option for my build.

Ahhh…. Think I understand now. So there it no “screw head” it’s just a threaded section that you loctite into place? I was visioning a fastener installed from the inside of the can.?

[vvviivvv]

Sorry, nothing that fancy - it is solid tho

[longballlumber]

No worries,

Let me know if you want to make a deal on these motors, the coolers, and your Etti HV controllers… I am interested on the entire lot if we can agree on a price.

[vvviivvv]

$650 and we split the shipping?

[longballlumber]

$650 and we split the shipping?

Let me think on it. This is no reflection on you specifically, but I get nervous buy used controllers.

[Jesse J]

Dang, the good ole days when neu motors were top quality! Great deal here!
I don’t have applications or I’d be snatching them up!!

[vvviivvv]

this was what i ran them in, 1.2m scale atlantic challenger, 28mm plastic jet drive on 3s.



top speed 25mph