Correct, I have not found the need to add extra caps to the XLX2 or X8S unless you are running excessively long battery leads. As mentioned above, it is best to keep the cable short, use good connectors and make sure your solder joints are good.
The XLX2 does not have in internal anti-spark. You can easily make an external one using some alligator clips are some resistors. You can use a wide range of resistors from 1/4 ohm to 5k. You can put several resistors in parallel to increase the wattage. If you run 6-8S it's a good idea to use a soft start anti spark circuit to save your connectors from eroding away. It does not damage the ESC.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Bookmarks