New xxx from aeromarine

[BlakeT]

Building a new xxx hull (even got the mini version) Troy did a great job running full length carbon. I have purchased everything for the boat so far other than an esc and motor. Going to start rigging it soon. I?m not sure whether I want to use a tp5680 800kv on 12s or my lmt 3080/7 on 10s. The lehner may not suit me as I am looking for 80mph and I?m a little scared to burn up that expensive motor.

[koen]

i have to say i use tp and lehner but lehner rules ,if you order a 3080/7 hiamp lk (air-cooling inside the motor) you can't go wrong the only thing is what you want to spend ,i use ztw esc and works perfect with lehner

[vvviivvv]

I don't think you would come anywhere near to burning up a 3080 lehner, speed controllers yes....

[vvviivvv]

My H&M no step 4 did low 90's with a lehner 3060/7 (1000kv) that was also 10s. i could of propped up and gone faster but was reaching the limits of the hull design already...

[photohoward1]

As an example I have been running my XXX for over 10?years on a Lehner 3060/7 on 8s. With a 457/3. 65 in race form all day. This boat likes to be light. A 3080 should get you to 80 No problem. Just be carful because when it?s stuffs it?s going to crack. No carbon in the world will stop it. Good luck. Keep us updated.


Sent from my iPhone using Tapatalk

[BlakeT]

Interesting, now I did figure the 3080 could do it but was just worried from lack of experience as far as burning it up. Good to know that 3060/7 can spin that size blade, I am also building two other hulls one herzog 45 inch mono and a real light weight all carbon fiber conquest that will both be sporting a 3060/10 on 10s.

[BlakeT]

My H&M no step 4 did low 90's with a lehner 3060/7 (1000kv) that was also 10s. i could of propped up and gone faster but was reaching the limits of the hull design already...

That’s impressive!

[BlakeT]

I do already have the 3080 on the shelf so I may just go for that.

[BlakeT]

i have to say i use tp and lehner but lehner rules ,if you order a 3080/7 hiamp lk (air-cooling inside the motor) you can't go wrong the only thing is what you want to spend ,i use ztw esc and works perfect with lehner

Good to know the ztw will work with it, I do already have the motor and yes it is the 3080/7 LK I just hadn’t decided if I wanted to use it on this build or another.

[jingalls007]

Sweet! I’m putting together a 53” DF Annihilator. Let’s meet up at Pleasant before it gets too hot out and run some boats.

[dasboata]

looking good Blake , I guess you were able to order from AM this time around ?

[BlakeT]

looking good Blake , I guess you were able to order from AM this time around ?

I sure was, he did this one nice for sure. How is your sprint cat coming along that build was looking nice!

[BlakeT]

Sweet! I’m putting together a 53” DF Annihilator. Let’s meet up at Pleasant before it gets too hot out and run some boats.

Man it’s been so long since I have heard from you I didn’t think you were still running boats haha! That boat you are building will be cool, I have so many more boats done since I last saw you and most are bigger gas size hulls, I want to maiden my 60” Apache soon. It has a 2230 in it for power

[jingalls007]

Man it’s been so long since I have heard from you I didn’t think you were still running boats haha! That boat you are building will be cool, I have so many more boats done since I last saw you and most are bigger gas size hulls, I want to maiden my 60” Apache soon. It has a 2230 in it for power

I’ll text you when I get back into town mid January. I haven’t had any time for boats until now. Looking forward to seeing your fleet on the water.

[BlakeT]

I’ll text you when I get back into town mid January. I haven’t had any time for boats until now. Looking forward to seeing your fleet on the water.

I can help you with that boat if you want, I think it should run in the 70s with that motor setup and the right prop. Plus it should be able to handle whatever choppy water you throw at it. I have been eyeing one of those myself and if I like how yours runs I might grab one myself.

[BlakeT]

Ok guys I have both motors now, which one should I go with??

[vvviivvv]

What might of been a cool setup - a Lehner outrunner.

[koen]

go for the lehner there is no beter motor

[dasboata]

I sure was, he did this one nice for sure. How is your sprint cat coming along that build was looking nice!

out for paint right now Blake

[BlakeT]

out for paint right now Blake

Put me in line for if you ever want to sell it! Haha

[BlakeT]

Lehner 3080 is going to be motto of choice, now to find out what prop I need to order from Chris to make this thing run about 70-75

[meangenesracing]

Ok guys I have both motors now, which one should I go with??

Go with the T P and give me the lehner lol

[BlakeT]

Go with the T P and give me the lehner lol

Right! Lol i forgot I had another xxx on the shelf and thought I would try the tp in that one to go for 80 and put the 3080 in this one as a real nice setup boat but still shoot for 70s

[BlakeT]

Some progress was made. I messed up and drilled the hole for the steering arm on the wrong side but luckily speedmaster makes a dual arm steering horn which will remedy this.

[dasboata]

Put me in line for if you ever want to sell it! Haha

I have a 1990 Aeromarine cat that am restoring now , I can build for you if your not in a rush !~

[mappo]

Building a new xxx hull (even got the mini version) Troy did a great job running full length carbon. I have purchased everything for the boat so far other than an esc and motor. Going to start rigging it soon. I?m not sure whether I want to use a tp5680 800kv on 12s or my lmt 3080/7 on 10s. The lehner may not suit me as I am looking for 80mph and I?m a little scared to burn up that expensive motor.

Hi, where can I get one of those carbon hull to buy xxx?

[BlakeT]

Hi, where can I get one of those carbon hull to buy xxx?

I got it from Aeromarine Laminates, you can look them up on Facebook.

[BlakeT]

Little progress made, motor is now mounted with the ends soldered as well as the coupler mounted. Next up is stuffing tube and cable

[BlakeT]

Mounted some carbon plate and started fitting the servo

[TRUCKPULL]

Some progress was made. I messed up and drilled the hole for the steering arm on the wrong side but luckily speedmaster makes a dual arm steering horn which will remedy this.

That is the side it should be on for racing.
When you push on the steering rod it flexes, it can not flex when you pull on it.

Blake I have a couple of new in boxes 12S -ESC's in the for sale forums.

Larry