HPR C5009 - SAW build

[vvviivvv]

As above, SAW built C5009 actual HPR hull.

Currently motor mounts are not mounted, they are new 5mm thick CF, and 8s capable.

Has 2x water cooling pumps, kitchen knife for a rudder

Believe the boat did 123mph at the Munich Saw in L12 config. setup was 2x NEU 1527 2100kv

Price $1400 for hull, can ship worldwide.

Could also offer a SAW suitable Lehner 2250/7 / AS26-XXX setup for additional fee.

[vvviivvv]

[vvviivvv]

Would take $1200 for a quick sale.

[jj2003]

Where are you located?

[vvviivvv]

Hi, uk although my partner is from the USA and I work stateside so frequently over, I will be flying on the 29th to miami,

Worldwide shipping is available too, or I can bring it as a check in…

[jj2003]

Hi, uk although my partner is from the USA and I work stateside so frequently over, I will be flying on the 29th to miami,

Worldwide shipping is available too, or I can bring it as a check in…

Just a few questions, I noticed a discoloration on the bottom of the hull.

Is it painted or was the hull repaired?

All the parts pictured come with it?

The motor you mentioned, that is one motor only?

If you bring stateside, any idea on shipping to Buffalo N.Y 14220 from Miami?

[vvviivvv]

Hi, the bottom of the boat is prepped for absolute top speed running... hence the ride surfaces

all the parts in photos are included, boat, drives, rudder, batt / motor mounts.

the motor setup I (it's a twin / pair) is brand new Lehner 2250/7 / and 1 run old AS26-XXX - extremely hard to persuade micha you were worthy of a pair - this is probably the highest quality setup for a hull of this size

I would have to double check the postage costs in the morning.. I do know I sent a Exocet (150cm cat) for around $180 (UK - USA)

[jj2003]

Hi, the bottom of the boat is prepped for absolute top speed running... hence the ride surfaces

all the parts in photos are included, boat, drives, rudder, batt / motor mounts.

the motor setup I (it's a twin / pair) is brand new Lehner 2250/7 / and 1 run old AS26-XXX - extremely hard to persuade micha you were worthy of a pair - this is probably the highest quality setup for a hull of this size

I would have to double check the postage costs in the morning.. I do know I sent a Exocet (150cm cat) for around $180 (UK - USA)

Ok, I'm very interested. Let me know what you would like for the package setup and if you can get shipping costs, that would be great. Thanks, I appreciate your time.

[vvviivvv]

Hi, with the motors and esc it would be $2800 + 100 shipping.

[jj2003]

Hi, with the motors and esc it would be $2800 + 100 shipping.

Is there a programmer required for the speed controller? Do you accept VENMO payment?

[vvviivvv]

Hi, I have the programming link for the speed controller.

I can take bank transfer, I don't have VENMO but have revolut...

[vvviivvv]

Hi all, will be traveling from UK to USA for the final time this year on November 12th if anyone stateside is interested

[vvviivvv]

Quick bump as flying this weekend if anyone wants it stateside.

and some pics of her in action...