Lehner 3060/10 in hurricane on 10s prop recommendation

[BlakeT]

I am building a carbon herzog hurricane mono with lehner 3060 on 10s and I was wondering what prop you guys may think will work good. I was thinking of starting off with one of my detongued and back cut 460/2 octuras that Dasboata worked up and going from there. Hoping to reach about 65 with this setup.

[koen]

just try that prop but watch temp, with that motor you have serious power and 65mph is no problem

[dasboata]

or a 457/5 blake

[BlakeT]

A 457/5? I didn’t even know you could get a 5 blade of that size. Thanks for the replies!

[oscarel]

Jeff Daft (hurricane) may be a good contact. He raced one a couple years ago in offshore. If you don't have his contact info send me a msg and I'll give it to you.

[BlakeT]

Thank you Oscarel, no I do not have his contact. Did he also run his with a 3060?

[oscarel]

Thank you Oscarel, no I do not have his contact. Did he also run his with a 3060?

He didn't but may know of someone who may have. Jim Vaughn comes to mind. I'll PM you both's contact info.

[dasboata]

A 457/5? I didn’t even know you could get a 5 blade of that size. Thanks for the replies!

typo 3 blade