Results 1 to 3 of 3

Thread: stringer help

  1. #1
    Join Date
    Oct 2021
    Location
    fl
    Posts
    70

    Default stringer help

    i used to run a stuffing tube with liner, i changer stuffing tube to run with no liner, but my teflon tube used to run the through the length of stringer, my new tube i cut flush with hull, do i need to run a small length of teflon liner in stringer now? theres obviously a difference of some clearance gap in the stringer with just running the flex shaft without any liner now.
    Attached Images Attached Images

  2. #2
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    Sounds like you need a bushing.
    I would definitely not use the same teflon as in your stuffing tube, you don’t want anything soft in there.
    "Look good doin' it"
    See the fleet

  3. #3
    Join Date
    Oct 2021
    Location
    fl
    Posts
    70

    Default

    Quote Originally Posted by Jesse J View Post
    Sounds like you need a bushing.
    I would definitely not use the same teflon as in your stuffing tube, you don’t want anything soft in there.
    yeah wasnt sure if i need to put something in the stinger to take up the space that the teflon liner used to be.
    Attached Images Attached Images

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •