Results 1 to 12 of 12

Thread: SSS 4082 W/ HRC cooler and 8mm bullets

  1. 06-01-2022, 05:02 PM #1
    ray schrauwen's Avatar
    ray schrauwen
    ray schrauwen is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,402

    Default SSS 4082 W/ HRC cooler and 8mm bullets

    SSS 4082 Brushless motor W/ HRC Cooler + 8mm Castle Bullets.
    Was mounted but never run. These motors alone without coolers sell for $100Cdn or more from "Ali" Ebay.
    Castle 8mm connectors are filled with a piece of machined copper where the wire goes into for a tight wire fit and more thermal mass for heat dissipation.
    HRC coolers are designed for better cooling via thick case to sink heat and are made in the USA but are no longer available.
    Quite a value for this motor with these bonus parts.

    $110 Cdn or $88 Usd Shipped via small tracked packet with delivery confirmation

    sss 4082 1.jpg

    sss 4082.jpg
    Nortavlag Bulc
    Reply With Quote Reply With Quote
  2. 06-01-2022, 08:53 PM #2
    TRUCKPULL's Avatar
    TRUCKPULL
    TRUCKPULL is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,912

    Default

    Ray
    What is the KV?

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet
    Reply With Quote Reply With Quote
  3. 06-01-2022, 09:47 PM #3
    ray schrauwen's Avatar
    ray schrauwen
    ray schrauwen is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,402

    Default

    2000kv, whoops! Sorry
    Nortavlag Bulc
    Reply With Quote Reply With Quote
  4. 06-04-2022, 10:23 PM #4
    norcalkilla
    norcalkilla is offline Junior Member
    Join Date
    Sep 2021
    Location
    CA
    Posts
    14

    Default

    Do you have 2 of them ?
    Reply With Quote Reply With Quote
  5. 06-05-2022, 02:45 PM #5
    ray schrauwen's Avatar
    ray schrauwen
    ray schrauwen is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,402

    Default

    No, sorry I do not. I have a second cooler if you wanted to get another 4082 and have a matching cooler.
    Nortavlag Bulc
    Reply With Quote Reply With Quote
  6. 06-05-2022, 08:02 PM #6
    TRUCKPULL's Avatar
    TRUCKPULL
    TRUCKPULL is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,912

    Default

    Ray
    I will take that extra cooler.

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet
    Reply With Quote Reply With Quote
  7. 06-06-2022, 09:15 AM #7
    ray schrauwen's Avatar
    ray schrauwen
    ray schrauwen is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,402

    Default

    Sorry Larry. That was only to try and aid my sale.
    Nortavlag Bulc
    Reply With Quote Reply With Quote
  8. 06-07-2022, 03:50 PM #8
    norcalkilla
    norcalkilla is offline Junior Member
    Join Date
    Sep 2021
    Location
    CA
    Posts
    14

    Default

    Yeah ill take the motor and the extra jacket. Thanks
    Reply With Quote Reply With Quote
  9. 06-07-2022, 05:40 PM #9
    ray schrauwen's Avatar
    ray schrauwen
    ray schrauwen is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,402

    Default

    Umm, I never meant to add a second jacket for free. Sorry for my miscommunication.

    Also, I checked the other cooler and it's not a fit since it's for a NEU 1521. Correct length but wrong diameter and wrong O-rings. If it was a fit I'd ask for a few bucks more but not original full price of course.

    I really should have phrased that properly and checked. I have another HRC cooler that fits but it's a different length.

    Embarrassing...
    Nortavlag Bulc
    Reply With Quote Reply With Quote
  10. 06-07-2022, 05:53 PM #10
    norcalkilla
    norcalkilla is offline Junior Member
    Join Date
    Sep 2021
    Location
    CA
    Posts
    14

    Default

    Quote Originally Posted by ray schrauwen View Post
    Umm, I never meant to add a second jacket for free. Sorry for my miscommunication.

    Also, I checked the other cooler and it's not a fit since it's for a NEU 1521. Correct length but wrong diameter and wrong O-rings. If it was a fit I'd ask for a few bucks more but not original full price of course.

    I really should have phrased that properly and checked. I have another HRC cooler that fits but it's a different length.

    Embarrassing...
    No worries I was planning on paying extra for the extra jacket.
    Reply With Quote Reply With Quote
  11. 06-08-2022, 02:37 AM #11
    Bp9145
    Bp9145 is offline Fast Electric Addict!
    Join Date
    Jan 2016
    Location
    FL
    Posts
    1,464

    Default

    the second cooling can, what size motor will it fit?
    Reply With Quote Reply With Quote
  12. 10-06-2022, 12:10 AM #12
    ray schrauwen's Avatar
    ray schrauwen
    ray schrauwen is offline Fast Electric Addict!
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,402

    Default

    Sold
    Nortavlag Bulc
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules