Hey guys, At the request of a friend I put together a short video looking at the LMT 4140 and 7050 outrunner motors. Second video is of the first spin up of the 4140 on 3S. Sounds lovely.
Hey guys, At the request of a friend I put together a short video looking at the LMT 4140 and 7050 outrunner motors. Second video is of the first spin up of the 4140 on 3S. Sounds lovely.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
What would you use them in?
The 4140 is going into my DF39 Q mono. The 7050 is waiting for a future project.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Very cool Tyler!
Reesor Boat Works
Choose the correct esc regarding the number of poles, that' s why outrunner motors sound incredible. Those Lehner are monsters.
Some additional pics of the 4140.
Lehner 4140 pic 1.jpglehner 4140 pic 2.jpgLehner 4140 pic 3.jpgLehner 4140 pic 4.jpgLehner 4140 pic 5.jpg
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Very cool!
MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169
My question Tyler is how much $ for these?
The price if you purchased them from me would around $475 for a water cooled 4140 and $400 for a 4125 water cooled. For comparison a 2250 is only 10 Euros cheaper than the 4125 with similar performance and a 2280 is 12 Euros cheaper than a 4140 with similar performance. When you include a cooling sleeve for the inrunners they are basically equivalent cost.
The big difference between the inrunner and outrunner is RPM and torque. The inrunner LMT's work best at high RPM's compared to a 4-pole TP/Castle/Neu type motor. This makes them a little difficult to prop where some boat setups like larger diameters. The outrunner produces much more torque at the same amperage. The 22 series runs best at 30kRPM and above where the 41 series run below 35kRPM, ideally in the 25-30kRPM range. If you were replacing a gas or nitro motor and wanted to use your existing props the outrunners would be better replacements than an inrunner from Lehner. This is true for larger 67-101 size nitro and gas size hulls.
Q-mono's are probably the tipping point where outrunners make sense. For smaller P boats where we run 40-50mm props inrunners still make sense. The outrunners will really shine in big hulls like gas mono's, sport hydro's maybe even riggers. They match the torque of a gas motor making it easier to use common props and hull setups.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Big inrunners like the TP56 series would be good equivalents to the 41 series outrunners. The 70 series outrunners are in a league of their own.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
How much for the 70 series? Dimensions? The 4140 sounds like a better choice for a 51" mono. Run some bigger props. Looks like you would need a special motor mount for the water inlets? Any certain esc that is needed? Would this be a better choice than the 3080 or 30100 series for efficiency and torque?
Sorry for all the questions!
Thanks, Eddie
Last edited by EddieM41; 01-18-2022 at 03:05 PM.
Eddie, the 70 series will cost between $975 for the 7025 up to $1200 for the 7050.
The 4140 would be a good choice for a Rio mono as a sport/offshore setup. The 4125 can output a max power of 6kW@35kRPM and the 4140 can output a max of 10kW@35kRPM. Assuming you run at reduced speeds to spin a gas prop you will be around 6kW so comparable with a mod 26cc Zenoah. The 3080 and 30100 are higher power motors and can also spin big gas props but are not quite as efficient if you run around 20kRPM and below. A 3080 will run around $715 for the high amp fanned version and a 30100 LK Hi-Amp will run $775.
You can find dimensions of the 70 series by clicking on the specific motor. https://www.lehner-shop.com/en/outrunner/torqstar-70/
If you want raw power and have a 300+ amp controller the 3080 and 30100 are the go to solution. If you want something to run competitive gas speeds with a 150A HV speeds I would go with the 4140. I am recommending the Castle XLX2 for any motor 8S and below. For 10S and above it depends a lot of the setup and your budget. ESC's jump up in price and features.
The outrunners do require a special mount to accommodate the water inlets, but it's not difficult to mod. I 3D printed a test mount which has a widened opening for the fittings. This gives a good idea of what modding looks like.
3453847_7037_a2e4b2175ba133b87ff6e636e4063b04_1200x1200.jpg3453849_7037_246bdde840ecb9a080a14d9788d84666_1200x1200.jpg
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
IMG_0506.jpg
A good comparison in sizes. I don't have the 4140 here, but it's close the Scorpion on the right.
From left to right: TorQstar 7050, Scorpion HK-7050, 3080, Neu 2230 and a Scorpion HK-5035
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Tyler, so the 7050 is for a future project Ha lol. Would it be a great motor for a Ambush 57" Scott Adam's builds. You willing to part with it? You should have never started this thread, lol
Hey Geno,
Yeah it would be ideal for a big scale hull, but would likely need 12-14S to run at best efficiency. It's only 405kv so on 10S you would be only spinning around 15kRPM. You could swing a 120mm prop if one existed or run it through a counter rotating twin output gearbox to drive a pair of props. That would be very cool. I could be talked into selling it, but at an equivalent replacement cost.
BTW, did you receive your motor yesterday?
-Tyler
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
gives an idea of the power of them motors... you can't really get a bigger hull than this
Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holder
Just wow...and that hull is enormous!
Reesor Boat Works
Geno, this is what I had in mind: https://www.offshoreelectrics.com/pr...rod=tfl-525b85
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Tyler. Looks like a lot of moving parts to break lol. Do you have any experience with these gear boxes? Or maybe someone else on here. Not sure I'd want to go with a twin screw mono never seen one on the water. How about a higher kv 7050 for 10s in the Ambush.you could get one correct? Or maybe you could get me 2 of the 4140. 1100 kv for a twin cat. PM me some prices if you don't mind and then I can decide which way to go. And yes I received the 3060 it's home waiting for me, thanks
Geno I have never run one, but someone I trust is running them in 60-70" offshore motors with twin inline 56cc and 70cc motors and he said they do OK. MHZ also makes one too but quite a bit more expensive. 405kv is a high as you can get for the 7050. It's already a special 3 wind which is not shown on the site. You would need to reduce the length to a 7040/4 wind to get 430kv or further to a 7025/5 to get 525kv.
I think a pair of 4140's on 10S or even 8S running Castle XLX2's would be better. I'll shoot you a price via PM.
Good to hear the 3060 arrived.
-Tyler
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Yeah that would allow you to run the Castle XLX2 which has an 8S max input. Rumors are Castle are working on an HV version, but who knows when it will be released. If you wanted 10S then you need to look at fairy high end ESC's which can drive to high speeds and frequencies like MGM, Kontronik and YGE.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Bookmarks