how do i fill the gap when running after market props?
how do i fill the gap when running after market props?
Use a nylstop screw, not this purple bullet.
i use the screw then the bullet on the stock prop.the aftermarket has a shorter hub.20220114_091858[365].jpg
why do the pictures post sidways?
Use a piece of fuel/water cooling tube as a spacer.
Paul Upton-Taylor, Greased Weasel Racing.
You can reduce the flexshaft lenght.
then the stock style prop won't work
ul-19, min-dom, Veles29
i need the spacer shown above
ul-19, min-dom, Veles29
you can fill the gap with peek rings(it's a kind of teflon)it gives also no problem with the balance of the propshaft (tfl sells them)
i found one here at the ose store
ul-19, min-dom, Veles29
Bookmarks