spacer

[Notch-R]

how do i fill the gap when running after market props?

[Alfa Spirit]

Use a nylstop screw, not this purple bullet.

[Notch-R]

i use the screw then the bullet on the stock prop.the aftermarket has a shorter hub.20220114_091858[365].jpg

[Notch-R]

why do the pictures post sidways?

[NativePaul]

Use a piece of fuel/water cooling tube as a spacer.

[Alfa Spirit]

You can reduce the flexshaft lenght.

[Notch-R]

then the stock style prop won't work

[Notch-R]

271542321_10220671608329145_7119376079676064914_n.jpg

[Notch-R]

i need the spacer shown above

[koen]

you can fill the gap with peek rings(it's a kind of teflon)it gives also no problem with the balance of the propshaft (tfl sells them)

[Notch-R]

i found one here at the ose store