has anyone had problems with vr3? stock everything but might be running on 2's 1450 lipo's? also with x431 prop MAYBE!?!
has anyone had problems with vr3? stock everything but might be running on 2's 1450 lipo's? also with x431 prop MAYBE!?!
I tried the same set-up and it melted the insulation on the 20guage wires and raosted the esc. TWICE.
whats vr3? I ran mine with 31mm prop and 2S lipo no prob - good run times and real quick
VR3 is the duratrax high rpm motor.
i have one on the way as well as a electrfly t400 and a speed 400 motor to try and ill let yall know which one i have a better outcome with also to mention im staying stock just prop change and motor
jimmy
^could ya just chuck the 400 speed motor in it with stock everything and tell me if its faster then stock motor?
cheers!!!
I ran a vr3 with the stock setup and it got smoking hot, think it burned out the esc. Moved on to a brushless setup and it is much better. Will try the vr3 again in something different.....so far not impressed with the motor.
Stay in front and don't get sprayed!
I picked up a VR3 for a relatives boat, about 6 runs later a brush broke/disintegrated. Looking at brushless now.
Bookmarks