RED HOT ESC cooler

[donhuff]

DSC_0001.jpg


DSC_0003.jpg

[1coopgt]

Silly question. How are you attaching it to the ESC. What's the bottom side of the cooler look like.

[dasboata]

nice I like it how much are you selling them for plz

[donhuff]

$30.00 or send me your esc and I will attach it for you for $50.00

How is your printed one coming along?


Not a silly question at all. I am gluing them on with either silicone RTV or JB Weld Quick. Both work equally well.

[longballlumber]

Don,

Are forming the "lip" on the brass tubing or is that something your purchasing?

[donhuff]

I make them! That's a trick, I had to make a couple of little tools to accomplish this.

[donhuff]

[ATTACH=CONFIG]173945[/ATTACH

This one is for an X8, but works the same

[fweasel]

Don, I assume these are anodized after they're machined? Can I special order some in black? Henry Ford style.

[dasboata]

$30.00 or send me your esc and I will attach it for you for $50.00

How is your printed one coming along?


Not a silly question at all. I am gluing them on with either silicone RTV or JB Weld Quick. Both work equally well.

the printed one looks fine just not the right material looks like it going to be a crowded market ,don't know how far I'm going to take this project

[donhuff]

Yes, anodized after machining.

Yes, you can get black ones. If the Piggly Wiggly has some black dye.

The wife got me some sapphire blue today, we'll see how that turns out soon.

[donhuff]

Your plastic one looks fine.

[donhuff]

Coooooooooool Blue


DSC_0004.jpg

[dasboata]

Coooooooooool Blue


DSC_0004.jpg

those are done on manual machines ?

[donhuff]

Yes, I have an old Grizzly milling/drilling machine, and a small drill press.

[dasboata]

Yes, I have an old Grizzly milling/drilling machine, and a small drill press.

Grizzly makes good stuff for the price here is my lathe comes in so handy


Sent from my iPhone using Tapatalk

[donhuff]

Oh Yes, I can't live without a lathe after having one for so long now.

I meant to say above, that my mill does have power feed on the X axis.