When using a separate rx pack do you remove the red wire from the aux wire too or just on the receiver wire?
Thanks
When using a separate rx pack do you remove the red wire from the aux wire too or just on the receiver wire?
Thanks
:canada
Remove the middle wire from both. The second set of wires also run power for higher BEC loads so it needs to be removed too.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
ok thanks Tyler
:canada
One other thing. I hate to muck around with the ESC connector itself, so I make the mod to a short extension lead.
That’s what I did used a short extension lead with the red wire removed.
:canada
Bookmarks