Need help ID'ing ML Boatworks Hull

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Ayles
    Member
    • Jun 2021
    • 62

    #1

    Need help ID'ing ML Boatworks Hull

    I found a partially built ML Boatworks Kit on my local Buy/Sell board. Without knowing exactly which hull it is I am not having much luck finding the right build photos to reference.

    Any help would be greatly appreciated!

    https://forums.offshoreelectrics.com...Rescue-Project
  • Tetefroid
    Member
    • Nov 2017
    • 78

    #2
    That cowling implies 88-90?? Circus Circus and an 1988 Miller High life.....I believe.

    Comment

    • Ayles
      Member
      • Jun 2021
      • 62

      #3
      Thank you! I think thats right for the cowling bits. I havent been able to confirm which ML boatworks kit I have.

      Still learning so much and trying to figure out what the next steps are.

      Comment

      • Tetefroid
        Member
        • Nov 2017
        • 78

        #4
        Probably this one......1/8th Scale Newton 158/ MHR 8200, 8401, 8700 - Jones Sponsons Extreme Kit

        Comment

        • Ayles
          Member
          • Jun 2021
          • 62

          #5
          Thank you thank you!

          I have spent hours combing this forum and still there are some topics that feel like total mysteries to me.

          1. Sponson Sheeting Order (though the boat I have already has that part half done so I can make a 50/50 guess on the remaining pieces)
          2. Bracing the center section through to the nose, seems flimsy to me and likely I may be missing something or will have to fabricate more supports out of either the plywood from ML or the Basswood sticks.
          3. Shaping/finishing the nose cone.
          4. The process of fitting/trimming/attaching the cowling and canard pieces

          If you are aware of any threads on these topics I would love to read them over!

          Thanks!
          Last edited by Ayles; 06-09-2021, 12:07 PM.

          Comment

          • Tetefroid
            Member
            • Nov 2017
            • 78

            #6
            2. Bracing the center section through to the nose, ....>>> That requires a carbon fiber or aluminum (or round wood dowel I suppose)spar the goes from sponson inside through the nose to the other sponson inside. IMG_7765.jpg

            Comment

            • Ayles
              Member
              • Jun 2021
              • 62

              #7
              Thanks!

              I see you are in WA? Wondering if you are local to me, I live Seattle.

              Comment

              • Tetefroid
                Member
                • Nov 2017
                • 78

                #8
                No, I live in the tri-cities...

                Comment

                • Ayles
                  Member
                  • Jun 2021
                  • 62

                  #9
                  Got it, thanks for the tips! I haven't ever built a boat like this... so feeling overwhelmed and trying to distill it down to series of smaller jobs I can take on as I get more supplies.

                  Comment

                  Working...