Results 1 to 3 of 3

Thread: Albert Lee 1/8

  1. #1
    Join Date
    Sep 2012
    Location
    Tg
    Posts
    1,438

    Default Albert Lee 1/8

    I've been working on this one for a while. It is a conversion from nitro to electric. Running a SK8 motor, ZTW 150 HV esc, Panther graphenes 10s 5000mah. Props so far x447/3, 450. Only four runs on it so far so still dialing it in and finding water ingress points.

    20210710_113733.jpg20210710_113751.jpg20210710_113810.jpg
    NZMPBA 2013, 2016 Open Electric Champion. NZMPBA 2016 P Offshore Champion.
    2016 SUHA Q Sport Hydro Hi Points Champion.
    BOPMPBC Open Mono, Open Electric Champion.

  2. #2
    Join Date
    Sep 2012
    Location
    Tg
    Posts
    1,438

    Default

    Here is a vid taken on Saturday with a drone flown by fpv. First boat is my Albert Lee, you can see how windy it is, the chop was around 4", I could only go about half throttle on the back straight. The second boat is Graham Trucking, a new build also just new on the water getting dialed in. He had a bit less wind.

    NZMPBA 2013, 2016 Open Electric Champion. NZMPBA 2016 P Offshore Champion.
    2016 SUHA Q Sport Hydro Hi Points Champion.
    BOPMPBC Open Mono, Open Electric Champion.

  3. #3
    Join Date
    Sep 2012
    Location
    Tg
    Posts
    1,438

    Default

    Short vid from Saturday. Boat stopped because the motor wires melted. I suspect they must have cracked or something. Fortunately I had a TP 4060 930 kv motor so that went in and it runs awesome on that.

    https://www.facebook.com/steve.trott...71180821021269
    NZMPBA 2013, 2016 Open Electric Champion. NZMPBA 2016 P Offshore Champion.
    2016 SUHA Q Sport Hydro Hi Points Champion.
    BOPMPBC Open Mono, Open Electric Champion.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •