My ESC is (most likely) telling me there is a connectivity issue. I've got 18 inches of wire between the ESC and the battery. I'm confident in my connections to the point where I am suspecting that the wire's inductance might be freaking out the ESC.
For context, I've got a Seal 150A Opto HV. When I plug it in, it gives me short beeps followed by long pauses (* * * *), which the manual states is either due to
overvoltage (not possible in this case. Using 6s battery on a 6-12s ESC),
bad motors (not possible, as I've tested on 4 motors)
or poor connections.
Could I fix this issue by adding a capacitor bank at the ESC?
Thanks
Bookmarks