Hi Y'all!
Since racing in Canada is most likely a thing of the past and the border shows no signs of opening this summer (or sock boy is still in hiding..) I have decided to take a partly finished single drive Pathfinder and gut the crap build I did for an inlay and a twinning.
I was thinking of this speedmaster rudder https://www.offshoreelectrics.com/pr...s-spdrs-009-du
And I was thinking of TFL 3/16" Hydro struts https://www.offshoreelectrics.com/pr...prod=ose-80046 to be cheap... or should I not be cheap? The ones in the link are only 1/8" bearing but TFL makes them in 3/16".
Any other suggestions?
I have a pair of 2 pole 36mmx60mm motors to start. They are Feigao knock offs, cheap as chips when I bought them. I also have a pair of Swordfish 120A 2-6S esc's to start with as well. I may go to some Proboat blue motors possibly that I have as spares for racing....
It has lots of room inside for parts and doing work. I'm curious as to how far back to mount the motors?
Help and suggestions are appreciated!
It's basically for fun, needs to handle bit of rough water...
Bookmarks