I?m building a 60? bonzi Apache with a neu 2230 725kv motor on 10s or 12s whichever is better for the motor. Any info on props or setups from similar builds would be greatly appreciated.
I?m building a 60? bonzi Apache with a neu 2230 725kv motor on 10s or 12s whichever is better for the motor. Any info on props or setups from similar builds would be greatly appreciated.
Last edited by BlakeT; 03-29-2021 at 08:57 PM.
What Kv ?
TenShock Brushless / Pro Marine
NEU Motors / Rico Racing/ Castle Creations
2023 NAMBA & 2018 IMPBA FE High Points "National Champion"
Whoops, can’t beleive I forgot that. It’s 1y 725kv
I run currently that motor on a 48" Assault on 10s 2p / 12,000mah (The NAMBA Legal limit).
Pretty versatle motor which can be run on up to an Octura X-472. I have used a Prather 275
when running it in my 45" AC Laser which worked well. My bigger mono's do seem to like some lift.
TenShock Brushless / Pro Marine
NEU Motors / Rico Racing/ Castle Creations
2023 NAMBA & 2018 IMPBA FE High Points "National Champion"
Wow! I was figuring an x465 but never thought about going that big for a prop. Thank you for the input that is very useful, what speeds are you seeing in those monos? I would imagine they put up some stout numbers. I am shooting for 60-65 with this boat. Also if you don’t mind me asking what esc you are running on it, thanks!
TenShock Brushless / Pro Marine
NEU Motors / Rico Racing/ Castle Creations
2023 NAMBA & 2018 IMPBA FE High Points "National Champion"
Yes I will start smaller and work up to it, thank you for all the info!
I would also recommend using a straight medium stiff 1/4" flex shaft with no step on that large of a boat.
Good luck with the build !!
TenShock Brushless / Pro Marine
NEU Motors / Rico Racing/ Castle Creations
2023 NAMBA & 2018 IMPBA FE High Points "National Champion"
Bookmarks