Hey, Ive got a Arrowshark gas boat 56 inches, looking to put a castle 2028 with a ZTW 300 amp Esc, hoping to run on 8s, any recommendations on prop size to start with?
Junior Member
Electric conversion
Hey, Ive got a Arrowshark gas boat 56 inches, looking to put a castle 2028 with a ZTW 300 amp Esc, hoping to run on 8s, any recommendations on prop size to start with?
Jobs come ang goes, physical beauty fades, stocks rise and fall, great friendships may end, but the benefits of philosophy will last a lifetime.
scale FE racer: Namba 826
Without knowing what your driving/performance goals are.. all I can do is suggest a reasonable setup..
Probably wanna run at least 10S2P in this beast!
Maybe start with 460/3 and check temps after the first minute.
"Look good doin' it"
See the fleet
Fast and Furious
Jesse is right about knowing your goals for the boat. Considering the size if the boat, if you aren’t looking for 70+ mph then using 8S makes sense because with that setup you can use a gas-sized prop for more efficient thrust. It’s a proven setup on well dialed-in boats. An x470 would be a place to start, but as always watch temps carefully the first few runs.
.
Last edited by Fluid; 02-23-2021 at 11:08 AM.
ERROR 403 - This is not the page you are looking for
Junior Member
Many thanks to you fluid and Jesse I just want a normal setup, not for racing or speed runs, just a knockabout rc boat.
Jobs come ang goes, physical beauty fades, stocks rise and fall, great friendships may end, but the benefits of philosophy will last a lifetime.
Posting Permissions
 |
Reply With Quote
Bookmarks