Rudder throw

[Thegreengiant12]

How much rudder throw is really needed, I?m trying to adjust my EPA on my transmitter.

[Fluid]

Needed for what? What boat? What speed? Hot tight do you want to turn?

For oval racing monos I usually set between 1/2” to 3/8” each side measured at the back edge of the rudder. You could start there....



.

[photohoward1]

Personal preference. How steady are you hands too.


Sent from my iPhone using Tapatalk

[Thegreengiant12]

Needed for what? What boat? What speed? Hot tight do you want to turn?

For oval racing monos I usually set between 1/2” to 3/8” each side measured at the back edge of the rudder. You could start there....



.

TFL cheetah and just for running it around the pond.
Speeds around 70 max

[JestDanny]

Speeds and driver style is how I see it. My boats that are set for oval race laps use / need very little throw something like 40%. Big wide high speed corners need very little. My other play boats = slower corners, driven like a nut drunkin sailor need more rudder, in this case more is better.
If its jest a play boat you can change it to suit your mood, want to go fast dial it down, want to drive like a nut leave it full?

[Norwest]

20 degrees both ways.