I picked up an old, unused fiberglass hull and hatch that was the Joysway Invincible Razor mono. The hull is 950mm/37in. x 255mm/10in. I found the original instruction manual online from years ago when it was out. I also found some reviews of it at the time. This boat has lived in a few different configurations including most recently the Joysway Alpha/Hobbyking HydroPro Inception (although these are now ABS hulls with outrunner motors, but very similar to the Razor from what I can tell).
For $55 for the hull I figured, what they heck, I'll make this my first Fast Electric build/assembly (I have a few other boats, some FE RTRs and some scale models I built). Through some research on the forums and looking at the original instruction manual, I put together a parts list. Steve V. was kind enough to review my setup and made a few suggestions so now I have all the parts and I'm ready to build/assemble!
Here are some pictures of the hull and parts. I'll list all the parts out in a separate post along with a few questions for you more experienced modelers. My objective is to make this a sport boat that I can play with at the lake with my kids and our other boats. Speed is not my main concern. I was looking at 6S power and RPM up to 30k. 40mph is, I think, an achievable goal and for the ponds and lakes we run in, that should be fast enough. Faster might be more fun, but it needs to handle the high winds and waves we see most of the season in Northwest IL.
Invincible Razor assy4a.jpgInvincible Razor assy2a.jpgInvincible Razor assy1a.jpg
Bookmarks