I am Currently Building a 980mm monohull. The Hull is 3D printed and a layer of fiberglass will be applied to the exterior. It will have two tfl 110mm stinger drives, and a center mounted rudder. I don't really know much about the propulsion part of the boat. I have been reading other forum posts and roughly decided to use two leopard 4082 1600kv motors, Turnigy 180a esc's, and two 6s 100c 6000mah 22.2v batteries. From my understanding this an acceptable setup and I am thinking of running 42mm 3 blade cnc props. Maybe someone who knows more could help me decide if I should downsize the motors or stick with what I have already picked out.
Bookmarks