H&M Freya hull finishing

[ArnoudRC]

Will start finishing this hull over the next weeks. Looking for tips to find the best quality decals. From H&M or from MHZ? Or alternatives? If MHZ, probably 84cm version?
Thanks


Verzonden vanaf mijn iPhone met Tapatalk

[ArnoudRC]

Start is there


Verzonden vanaf mijn iPhone met Tapatalk

[ArnoudRC]

Paintwork done


Verzonden vanaf mijn iPhone met Tapatalk

[ArnoudRC]

Update: steering and electronics


Verzonden vanaf mijn iPhone met Tapatalk

[Jesse J]

What decals are you looking for?

[Nick1979]

Related to the decals - if one wants to place them on the painted hull, before applying the final clear coat, will they stick well? Or should decals be applied on a really smooth surface for maximum adhesion? For example, does it make sense to spray 1-2 coats of final clear (no sanding) then decals, then a few more coats of clear?

[ArnoudRC]

Strut level a good starting point for this hull? What do you think?


Verzonden vanaf mijn iPhone met Tapatalk

[Jesse J]

Looks good to me, I suspect it will only go up from here, but only one way to find out!
What motor, voltage and prop are you starting with?

[ArnoudRC]

6s, sss 4092 1650kv, x443 to start/ x445 prop later.


Verzonden vanaf mijn iPhone met Tapatalk

[koen]

If you can set the prop 5mm higher less load to start with, i have a mistic 114 single motor (4092 1400kv on 6s)and run so good
I have excellent results with Prather props

[ArnoudRC]

If you can set the prop 5mm higher less load to start with, i have a mistic 114 single motor (4092 1400kv on 6s)and run so good
I have excellent results with Prather props

Ok, great. Will start with the strut a bit higher. Thanks guys

Technically ready to test somewhere next days.


Verzonden vanaf mijn iPhone met Tapatalk

[Johnc]

Need to rotate that water jacket to get the exit line on top. Looks like the exit line is near the bottom, the jacket wouldn't fill but a quarter of the way.

[ArnoudRC]

Thanks John, maybe my aquatic skills are bad. Why is that? You suggest to push the water flow upward in the jacket? In the direction below? Or do you mean to rotate the nippels facing upward?


Verzonden vanaf mijn iPhone met Tapatalk

[Johnc]

Fittings on top, exit nipple should be the highest one, that way cooling can is full of water before exiting to get maximum use of the can.

[ArnoudRC]

Verzonden vanaf mijn iPhone met Tapatalk

[ArnoudRC]

Bit of detailing during Christmas


Verzonden vanaf mijn iPhone met Tapatalk

[Panther6834]

Bit of detailing during Christmas


Verzonden vanaf mijn iPhone met Tapatalk

I like...simplistically bold.


~ More peace, love, and kindness would make the world a much better place

[1coopgt]

Bit of detailing during Christmas


Verzonden vanaf mijn iPhone met Tapatalk

Looks great. Is it an optical illusion? It looks like your rudder isn't straight up and down. Looks like the front bottim tip is kicked back a little. If it is it may cause some issues .

[ArnoudRC]

Hi, no. The position is ok.


Verzonden vanaf mijn iPhone met Tapatalk

[Alfa Spirit]

You can make your own PDF files with wanted logos and a pro will print your file on clear or white adhesive vinyl, You choose logos and their size.

[tubben]

Think there decals are from the same supplier.

[koen]

H&M and MHZ they have excellent decals

[tubben]

My Freya.DSC_1035.jpg

Skickat fr?n min XQ-AS52 via Tapatalk

[ArnoudRC]

H&M and MHZ they have excellent decals

I know. Had some high quality vinyl sponsor decals laying around. Personal touch and saved quite some money


Verzonden vanaf mijn iPhone met Tapatalk

[jaike5]

Lose the Y fitting. Water follows the path of least resistance. I use a manifold to get full pressure to both the motor and esc. You can also restrict the esc line out with a zip ty to equalize the pressure in both lines if you choose to leave the Y in. Not a fan of restriction!
Happy New Year!!
cheers, Jay.

[ArnoudRC]

Thank you! Wish you also all the best. On the y connector. You are right. I?m working on a water pump to get enough pressure through a single line (>esc> motor) Will test that setup.


Verzonden vanaf mijn iPhone met Tapatalk

[1coopgt]

Thank you! Wish you also all the best. On the y connector. You are right. I?m working on a water pump to get enough pressure through a single line (>esc> motor) Will test that setup.


Verzonden vanaf mijn iPhone met Tapatalk

Why not use a duel pick up rudder or a inhull pickup through the bottom of the boat in one of the ride pads. A lot less weight than adding a water pump. Plus you wouldn't be eating up run time powering a water pump.