Results 1 to 2 of 2

Thread: SeaKing 180 V3 & Leopard 4082 X2 issues

  1. #1
    Join Date
    Jul 2020
    Location
    MI
    Posts
    5

    Default SeaKing 180 V3 & Leopard 4082 X2 issues

    Howdy!

    A few weeks back I picked up a second hand Traxxas Spartan and have been having a blast with it... until the XL540 locked up solid. So I did what anyone who likes speed does and upgraded. Dropped in the SeaKing 180 V3 and the 1600kv Leopard and after wiring it up took it to the water to find that it seemed awfully slow. Though understanding the 1600kv Leopard wasn't going to spin as fast as the 1800kv XL540, it seemed like something was hindering it from spinning at full RPM (<30mph on a pair of fully charged 8000mah 3S). Tried different 3S batteries, same issue. Tried a different TX/RX combo thinking it could have been the stock Traxxas units, no dice. I haven't found anything out about the SeaKing's programming that would limit the throttle input, so I am at a loss. Have a new CNC metal prop coming later this week and am hoping to be able to get the most out of the purchase!

    Any help would be greatly appreciated.

    Regards.

    Edit: I have no idea how I managed to post this in the wrong thread. Apologies.

  2. #2
    Join Date
    Mar 2020
    Location
    NH
    Posts
    319

    Default

    Hi T this is at leased a 6s motor tray to use 2 3s in series should be better and you can use a prather 225 or ABC 1716 17 props

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •