Results 1 to 2 of 2

Thread: voracity rudder

  1. #1
    Join Date
    Jul 2011
    Location
    ON
    Posts
    141

    Default voracity rudder

    hello, I have yet run my voracity boat because did not find a break away rudder for it, do you guys know of any that would fit??

  2. #2
    Join Date
    May 2016
    Location
    Mi
    Posts
    82

    Default

    You want to sell your boat? If so pm me.

    Breakaway rudder.
    I don’t have one to look at .
    To make your rudder a breakaway you need one bolt and another hole .
    If your rudder has two bolts take out the lower bolt. Go to ace hardware or home depo and buy a small copper screw and bolt . Don’t go bigger that 1/8 round . Tighten the top bolt pretty hard. Grab it with your han and make sure it will pivot with good force. It does not matter if the brass bolt is smaller then the hole just let it float in the lower hole. There you go should cast you less than a buck. No need to go buy anything.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •