Used Proboat Voracity hull and hardware with carbin inlay

[fweasel]

SOLD

Used Proboat Voracity 36" mono hull and hardware with carbon inlay. Boat ran a best of 74mph on 6S. Includes OSE HD flex cable. Tip was poured with epoxy and chopped carbon fiber. Transom reinforced with carbon plate and upper seam reinforced with epoxy with chopped carbon fiber. Carbon fiber tape along side seams. Canopy reinforced with three layers of fiberglass so GPS still works. Custom rudder extension with dual cooling breakaway rudder. Carbon fiber ESC mount and rear motor support (fits TP4060). Bottom of the hull was blueprinted and repainted (my first attempt, not the prettiest). Has several chips and dings, most were filled with epoxy. Several gelcoat stress cracks on the bottom of the hull. Side seam cracked before seams were reinforced all the way forward. Crack was clean and straight. Closed with CA, then repaired from the inside with carbon fiber tape inlay. No electronics included

$200 shipped in the US in original box and packing. For sale on other forums as well.


IMG_20200708_082048.jpg IMG_20200708_082111.jpg IMG_20200708_082125.jpg IMG_20200708_082131.jpg IMG_20200708_082152.jpg

[fweasel]

Additional Pics:

IMG_20200708_082211.jpg IMG_20200708_082226.jpg IMG_20200708_082253.jpg IMG_20200708_082328.jpg IMG_20200708_082333.jpg

[fweasel]

Additional Pics:

IMG_20200708_082350.jpg IMG_20200708_092404.jpg

[fweasel]

New price, $200 shipped.

[fweasel]

Sold