Hi all built a 24 inch round nose Miss Thriftway hydro 12 years ago set up on 2190 kv 2860 Leopard running on 4s lipos recently i noticed substantial amounts of water in hull after 2 minute runs checked hull for cracks and checked plumbing system for leaks i even removed the flex cable and turned a bevel on the drive dog and re-packed the stuffing tube with Mercurys 2-4-C marine grease tonight after a 2 minute run there was 2 1/2 oz of water in the boat and i noticed a big gob of grease beside the flex hex i do not use a teflon liner just 3/16 brass tubing what are the chances the brass tubing could be wore out ! Where else could i look to resolve this problem ! Regards Andris Golts.
Bookmarks