Results 1 to 3 of 3

Thread: Swordfish X+ 200A ESC with Data Logging : 2s-8s lipo

  1. #1
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,908

    Default Swordfish X+ 200A ESC with Data Logging : 2s-8s lipo

    Swordfish X+ 200A ESC with Data Logging : 2s-8s lipo

    I am going to use two of these in a twin 6S Cat

    Extra Caps -- What size, voltage, and how many on each should I use??

    My Max Amp draw should be 150a to 180A on my planed setup.

    Larry
    Last edited by TRUCKPULL; 10-11-2021 at 01:12 AM.
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  2. #2
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,908

    Default

    Any body?
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  3. #3
    Join Date
    Aug 2021
    Location
    FL
    Posts
    324

    Default

    Does your data log provide ripple voltage?
    You want to bring that below 10% of the applied voltage. 5% if you want to be highly diligent.
    Anything lower is wasted effort. You might already be there.

    For a good start, you want caps in parallel for ~ 5000uF as a start. In the RC track world, they are typically in the 5000-9000uF range.
    You have to have extreme short leads and use low ESR caps.

    I doubt you will need any tbh. There is a lot of snakeoil in those cap packs.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •