It works well if the amp draw isn’t too high, but an ESC won’t usually cause a motor to run hot - too many amps does. In this case the OP’s setup almost certainly pulls over 150 amps, which on 12S generates a lot of heat in that small motor. That motor is rated for only 3050 continuous watts, which on 12S is under 70 amps. A smaller prop or running 8S would likely have solved his heat issue - he didn’t bother to define what “hot” means - without the cost of the new ESC (not that a better ESC isn’t a good idea).
.
Last edited by Fluid; 09-05-2020 at 08:42 PM.
ERROR 403 - This is not the page you are looking for
Bookmarks