FS: Schulze 40.160, Schulze 32.202WK, Schulze 40.304WK
Hello Guys,
I am parting with a couple of Schulze ESCs.
#1: two sets Schulze 40.304WK
IMG_20191213_005759.jpg
1) set on the left: Excellent condition, even the rear water cooling plate looks almost as new. Both got the tags from their last service from Schulze (18.12.14 and 25.10.16, can forward documentation with ESCs), havent been run since their last service. Very long cables, double lamella 6mm motor connectors.
Price: $785 per ESC (699?)
2) set on the right: Very good condition, special on them the green housing was painted in piano-black for a perfect finish. Both serviced last time in 2016, one ESC without tag. They have been successfully used in a HPR 150 AMG; thus also the painted covers, both ESCs got scratches on the top sides of the cover (not visible installed anyway, see last two pictures as the installation is extremely tight in a 150). The boat is downgraded from LMT 3040/9 to 3040/11 and currently either runs with Schulze 40.161s WK or MGM 250's as they are sufficient now.
Price: $799 per ESC (715?)
Weight as pictured per ESC including cables: 1.5lbs
The ESCs are meant to be sold in matching sets, if looking for a single 40.3XX send me a PM and we may find a solution.
#2: single set Schulze 32.202WK
IMG_20200513_211936.jpg
Selling a very rare set of Schulze future XL controller, Type 32.202WK so up to 10S and 200A constant current acc. spec. They have lower inner resistance and thus higher efficiency/less heat than the old-school Schulze 40.160WK at the same currents.So if its capabilities are enough it might even be the better choice even for SAW racing.
ESC works flawless, 6mm gold bullets in perfect condition, 2x 11AWG wires per battery pole.
Price per ESC: 599? (Euro) as equivalent to $649 (USD) per todays exchange course
#3: single Schulze future XL 40.160WK
IMG_20200512_234517.jpg
Selling a Schulze future XL controller, Type 40.160 so up to 14S and 160A constant current acc. spec. The water cooling has been retrofitted with 1/4" by 1/4" square brass tube and high conductive thermal adhesive (>60% pure silver oxide) for best thermal connection possible. ESC works flawless, 6mm gold bullets in perfect condition, 2x 10AWG wires per battery pole.
Info:
Unfortunately one of the previous owners has potted the main PCB with Epoxy resin so none of the interfaces can be used. But its set up correctly and thus hardly any influence on normal use, these ESCs are known for Plug & Play.
Price: 460? (Euro) as equivalent to $499 (USD) per todays exchange course
Payment possible via PayPal or wire transfer, international shipping is welcome, shipping with DHL Express or UPS Express. Enough people should know me that my sales and the items are credible. I only posted one picture per ESC, send PM and I can share all pictures via Email or Whatsapp.
regards,
Manuel
Reply With Quote
Originally Posted by thisisabook
Bookmarks