Results 1 to 4 of 4

Thread: Prop fitment issue on Sonicwake

  1. #1
    Join Date
    May 2020
    Location
    GA
    Posts
    1

    Default Prop fitment issue on Sonicwake

    All, I purchased a CNC 40mm 3 blade 3/16 bore prop for my Sonicwake. Is it normal for this prop to be a very tight fit on the shaft? In fact, to even get it to start to slide on I've had to carefully ream the bore. The orginal prop slid right off.

  2. #2
    Join Date
    Jul 2016
    Location
    IL
    Posts
    4,100

    Default

    I have some props that fit tighter than others. Sometimes its just the dog teeth at the end of the bore.
    Vac-U-Tug Jr (13mph)

  3. #3
    Join Date
    Jan 2013
    Location
    Ga
    Posts
    1,358

    Default

    It'll be fine long as you didn't ream it out much. How does it fit now?

  4. #4
    Join Date
    Dec 2010
    Location
    NY
    Posts
    3,116

    Default

    I come across this once in a while in my business , I glue & wrap some sandpaper around a appropriate size rod and put it in the drill works great

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •