Results 1 to 3 of 3

Thread: Swordfish 200A Cooling?

  1. #1
    Join Date
    Jul 2018
    Location
    CO
    Posts
    12

    Default Swordfish 200A Cooling?

    I'm a first-time builder and am using a SwordfishX 200A ESC. It has two cooling channels, one right and one left. Can I simply loop the output of the right channel back into the left channel, or will this provide insufficient cooling on the left side? I can use Y splitters to split the input cool water, then combine the exhaust water if need be, though real estate is getting short in the ESC mounting location. I would appreciate any advice -
    Attached Images Attached Images

  2. #2
    Join Date
    Feb 2018
    Location
    PA
    Posts
    330

    Default

    Yes...you can loop the left to the right....cool in on the left hot out on the right...or vice versa.... not good to use y splitters.... use separate water intakes for motor and ESC...if at all possible.... Hope this helps ya....

  3. #3
    Join Date
    Jul 2018
    Location
    CO
    Posts
    12

    Default

    Thanks very much. Was hoping I could - and I do have separate water intakes for motor and ESC.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •