Tweet
My Custom Zelos 36"
Hey everyone!
Its been a long time coming - paint took forever but here we are! This is my customized Proboat Zelos 36" !
Painting it took about a month - there were multiple clear coat hiccups but im still very pleased with the end results.
List of Mods:
Push and Twist cowl locks
Oxidean Marine large ID water cooling lines
Custom made polished balanced and sharpened triple bladed props
OSE heavy duty drive shafts
redrilled water outlets on side of the boat
shaved the hull leading into the bottom water pickups
Black and orange Carbon Kevlar inlay
OSE Battery straps
Stock:
Motor
ESC
Servo
I plan on eventually having two SeaKing 180a ESCs installed - but im tired of waiting for it to be in running condition so now that I have just put it back together im going to enjoy it for a bit before i change anything else on it!
First time laying carbon weave and I think i did okay, I stayed away from removing the motors because I heard its a pain to realign them perfectly so this is why theres no weave near the rear of the motors. But the rest of the body I pretty much got!
For looks I added wire looming over the motor connectors to go with the black and orange scheme.
Ill be taking more pictures and videos coming up these next few weekends with it in the water and haulin ass!
Thanks to everyone for answering my questions throughout this build - yall helped me out a lot!!
IMG_20200426_154139613.jpg IMG_20200426_153947783.jpg IMG_20200426_153920471.jpg IMG_20200426_154208533.jpg IMG_20200426_154045610.jpg
Its been a long time coming - paint took forever but here we are! This is my customized Proboat Zelos 36" !
Painting it took about a month - there were multiple clear coat hiccups but im still very pleased with the end results.
List of Mods:
Push and Twist cowl locks
Oxidean Marine large ID water cooling lines
Custom made polished balanced and sharpened triple bladed props
OSE heavy duty drive shafts
redrilled water outlets on side of the boat
shaved the hull leading into the bottom water pickups
Black and orange Carbon Kevlar inlay
OSE Battery straps
Stock:
Motor
ESC
Servo
I plan on eventually having two SeaKing 180a ESCs installed - but im tired of waiting for it to be in running condition so now that I have just put it back together im going to enjoy it for a bit before i change anything else on it!
First time laying carbon weave and I think i did okay, I stayed away from removing the motors because I heard its a pain to realign them perfectly so this is why theres no weave near the rear of the motors. But the rest of the body I pretty much got!
For looks I added wire looming over the motor connectors to go with the black and orange scheme.
Ill be taking more pictures and videos coming up these next few weekends with it in the water and haulin ass!
Thanks to everyone for answering my questions throughout this build - yall helped me out a lot!!
IMG_20200426_154139613.jpg IMG_20200426_153947783.jpg IMG_20200426_153920471.jpg IMG_20200426_154208533.jpg IMG_20200426_154045610.jpg
Comment