Been working on this spare Zelos hull from time to time while glue is drying on other builds. I gutted it completely earlier this winter, sanded the entire interior, and ground out all of the epoxy blobs along the seams. I dremeled out the stock motor mounts and left just the support for the stuffing tubes. Blank slate.

IMG_20191027_172420.jpg IMG_20191027_172406.jpg IMG_20191027_172459.jpg

The original owner of this boat flipped it on one of his first runs and knocked one of the struts off the hull. It tore a hole in the rear of the right sponson. I made templates and cutout 3mm carbon fiber plates to reinforce both strut mounting areas. I filled in the missing material on the right side with a second, smaller carbon plate, then epoxied it in place with JB Weld.

IMG_20200329_163318.jpg IMG_20200329_163333.jpg