Results 1 to 4 of 4

Thread: Bad on off switch

  1. #1
    Join Date
    May 2019
    Location
    NH
    Posts
    73

    Default Bad on off switch

    So my on off switch went bad 6 months ago and i got it into the on position and left it there. Well it is acting up and the boat shuts off randomly now. So i don?t need to program the esc so all i need to do is delete the switch. Any suggestions on going about this?

  2. #2
    Join Date
    Feb 2008
    Location
    GB
    Posts
    2,726

    Default

    On many ESCs with switches you can cut the switch off, solder the wires together, and insulate the exposed end. Or if you are handy with a soldering iron and the ESC isn't potted, desolder the switch leads from the board and bridge the switch lead contacts on the board.
    Paul Upton-Taylor, Greased Weasel Racing.

  3. #3
    Join Date
    May 2019
    Location
    NH
    Posts
    73

    Default

    Well i guess i have to some how figure out what one of the two red wires is the program wire because it is a 3 wire switch

  4. #4
    Join Date
    May 2019
    Location
    NH
    Posts
    73

    Default

    Soldered in reedy power esc switch no.29184. All fixed. This one will stay in the on position

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •