Results 1 to 3 of 3

Thread: Miss Geico 36 twin

  1. #1
    Join Date
    Oct 2019
    Location
    Ca
    Posts
    14

    Default Miss Geico 36 twin

    I?m wanting to try some 3 blade CNC stainless props on her. Anyone have any suggestions.
    Running
    2-3s 9000mah in series to 6s with splitters.
    2- dynamite 120a esc
    2- dynamite 4 pole 1900kv at 11deg timing.

  2. #2
    Join Date
    Mar 2019
    Location
    AZ
    Posts
    27

    Default

    https://www.ebay.com/itm/645-3-3D-Pr...0AAOSw38Vbp-tM might work! im looking to get these on my Zelos and im pretty sure theyd work - look pretty too, very well made props I have the same sellers polished and sharpened prop for my sonicwake and it gets up on plane mush faster!

    Also - how are you liking that oxidean tubing? did you have to put different sized inlets/outlets to make sure they fit? or is it the same inner diameter as the stock tubing? Im looking to get colored tubing and I want to make sure i get the right ones!

  3. #3
    Join Date
    Mar 2020
    Location
    IN
    Posts
    1

    Default

    I recently put the oxidean marine tubing on my geico 36 and it fits but due to larger inner diameter it requires some small zip ties to make sure it stays!! I also drilled stock fittings inner diameter slightly larger to promote better cooling as well..

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •