Results 1 to 3 of 3

Thread: Miss Excite setup help needed.

  1. #1
    Join Date
    Mar 2020
    Location
    MN
    Posts
    5

    Default Miss Excite setup help needed.

    I found a new Miss Excite off of Ebay for $220 and I would like some help getting it setup. I am new to the sport and only have experience racing buggies. I need to get a battery, prop, and receiver to get it running. I would like to see the inside of your boat if possible. I'm using Sanwa electronics and need to know where to mount the receiver (471W is compatible), and how to properly mount it and keep it waterproof. I have a local club that is somewhat close that runs IMPBA events. They have a RTR class but I'm unsure if the stock 2000KV motor is accepted in P-1 limited events. Any current recommendations for a 4S battery that is 14.8V or under. Finally what prop would you recommend? Any help is appreciated.

  2. #2
    Join Date
    Dec 2010
    Location
    NY
    Posts
    2,582

  3. #3
    Join Date
    Mar 2020
    Location
    MN
    Posts
    5

    Default

    I did check the link but nothing was found.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •