Results 1 to 2 of 2

Thread: ESC capacitors HELP NEEDED!

  1. #1
    Join Date
    Sep 2019
    Location
    CA
    Posts
    7

    Default ESC capacitors HELP NEEDED!

    Can anyone tell me how the caps are wired in to the battery leads on a Dynamite 120 amp marine ESC? I have an old Prather deep v l converted over to electric but while designing another elaborate but useless function for it to perform l accidentally shorted the two caps that were wired into the series input cables. I don't think anything else was harmed as they just fell off leaving two nicely tinned bare spots. Unfortunately there was not enough left of the caps or the little circuit board to figure out how they fit in the circuit. I have capacitors and a soldering iron and the weathers is beautiful so if there is anyone that might be able to help l would greatly appreciate it,
    Thx, BobbyD
    Last edited by BobbyD; 02-02-2020 at 02:22 PM. Reason: intended for help

  2. #2
    Join Date
    Jul 2016
    Location
    IL
    Posts
    4,100

    Default

    Technically, you don't need them to run that ESC as long as you insulate the bare wires to prevent a short.
    Vac-U-Tug Jr (13mph)

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •