My Jet Jam Brushless Project

[FLMIBrewer]

Not a bad start for initial setup. Its definitely to hot a setup on 3s for long wot runs but for the rapid running I do, it's pretty good. The current speed where I run keeps me mid throttle mostly. Current motor is a 2212 stator, 9 pole, 6 slot i believe. Self righting is MUCH better now too. I'm thinking a a little taller stator and little less kv maybe the sweet spot to deal with heat better since I don't have a water cooling mount. Motor is the only thing that needs water cooling IMO, Esc is hardly warm. i will be tidying up the wires to lose some weight and clean up the inside.

Proboat Jet Jam
2212 4500kv upgrade
9g digtal mg servo upgrade
CC multirotor 35a esc upgrade
Mike's subworks esc/tx adapter
Dx5 rugged
Sr215 rx