If this is your first visit, be sure to check out the FAQ by clicking the link above. To post questions and to view pictures, you will have to register by clicking here register : Important, Please make sure to add oseforum@offshoreelectrics.com to your safe senders email list. Otherwise the activation email may go in your spam box. Or to start viewing/reading the forum without having to register, select the forum that you want to visit from the selection below.

Welcome to The OffshoreElectrics (OSE) RC Electric Boating Forum!

Please take a moment to read this. OSE is a tight knit community of like minded rc boating enthusiasts who value "on topic" and clean discussions. You are currently viewing our forum as a "guest". A guest will not be able to post questions or view pictures and videos.

Registration is fast, simple and absolutely free. Please click here to Join now.

By joining our free community you will have access to post topics, create your own image gallery to share with everyone, communicate privately with other members (PM), respond to polls, upload content and access many other special features.

If you have any problems with the registration process or your account login, please contact us by clicking here.

Results 1 to 1 of 1

Thread: Esc advice

Thread Tools
- Show Printable Version
Display
- Linear Mode
- Switch to Hybrid Mode
- Switch to Threaded Mode

08-31-2020, 06:32 PM #1
montymike

View Profile

View Forum Posts

Private Message

Senior Member
Join Date

Jul 2012

Location

mi

Posts

774
Esc advice

Have a converted 45? gas boat fiberglass. It is a deep v hull . Going to be using it as a sport boat expecting mid 40s speed using a 1000 K.v. SSS motor On 6-8 s and 50-55 prop. Step down shaft surface drive. Was thinking between a seaking 130 And a sordfish 240 pro .and will these esc work without a overload? Thanks mike

Last edited by montymike; 09-01-2020 at 08:41 AM.

Reply With Quote